Site Overlay


They hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own. You might need develop something yourself. The dma2 parameter sets the second hardware DMA number. Your ISP would have to choose between starting another dedicated session of the routing demon or enlarging his backbone routing domain by your Linux CE box thus also allowing you to litter his backbone routing with your own misconfigurations etc. The wirings can be found on the Cisco web – specifically here. If you have some success stories with the older versions of all the software, feel free to send me precise descriptions of how you arrived at your operational setup – I’ll include your instructions here. Beware – this DTE cable is quite a poor hack.

Uploader: Meztiktilar
Date Added: 14 December 2005
File Size: 16.14 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 28920
Price: Free* [*Free Regsitration Required]

Click Here to receive this Complete Guide absolutely free.

The radio transmission is started linkx soon as there is no more incoming data on the serial for more than 2ms. Francois Romieu has “cut some non-compiling functionality”. This is not the case with dscc4 though.

The “WAN router drivers” foldable subsection should really be called “Sangoma hardware drivers” and pretty much belongs into this category. Once again I tried the conversion hack. Just where does all of that meet? This scenario is typical for sync serial WAN links such as X.


I have experienced reasonable ping round trips. For more advanced trainees it can be a desktop reference, and a collection of the base knowledge needed to proceed with system and network administration.

In Cisco IOS for instance, this is not a problem – you configure two static default routes to the two WAN interfaces and your redundant topology is hereby finished.

Ubuntu Manpage: sethdlc – get/set Linux HDLC packet radio modem driver port information

In other words, these six-or-so entries hide almost completely separate HDLC stacks – except that many of them use syncppp. In WAN networking, line outages are something you have to deal with on automatic basis. Hlc hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own.

Many thanks for your help! On Linux, there are only two attributes: In other words, some parts are missing from this modified sethdlc. The mode string format of the soundmodem driver is as follows: With long packets Bthe packet jdlc was about 0. Sync serial software support in Linux. Nevertheless, the source code comments in dlci.

This is the only correct combination with a chance for perfect operation. The souncard modem driver however reserves the card only when the interface oinux started, i. I would prefer to really pack one HDLC frame in one radio packet. Beware – this DTE cable is quite a poor hack. Why is it different from the clock rate?


Generic PPP for Generic HDLC [1/3]

Forget about user-space pppd in the first place. At some point in the past, this stack was derived from item 1 and now it lives a separate life. To quote Francois Romieu: Just load the sound driver insmod sound and remove it again rmmod sound. In the worst case, would it be “easily” possible to alter the sources and introduce a small sleep after every HDLC frame?

ppp over MHz transceiver, HDLC frame timing

If both the E1 linuux were misconfigured to “clock source internal”, the setup worked, but tended to yield random clusters of lost packets as the two internal clocks wandered.

In addition, a flow-control-only solution would result in HDLC frame fragmentation. Appendices – links and pinouts. Alternatively, the gathering of such information could be linkx via nested function calls, that would aggregate logically AND all the status flags at the different network sublayers involved. Read on for details if interested.

It then shifts the gears accordingly to meet that intention.